(951) 677-1955

Foreman ADA locker benches meet the guidelines for the ADA locker benches as specified by the United States Access Board.

https://www.access-board.gov/guidelines-and-standards/recreation-facilities/guides/sports-facilities/dressing,-fitting,-or-locker-rooms

Accessible benches are required in dressing, fitting and locker rooms, and where seating is provided in saunas and steam rooms. Benches must have a clear floor space positioned to allow persons using wheelchairs or other mobility devices to approach parallel to the short end of a bench seat. In saunas and steam rooms, this floor space may be obstructed by readily removable seats.

Benches must have seats that are a minimum of 20 inches to a maximum of 24 inches in depth and 42 inches minimum in length. The seat height should be a minimum of 17 inches to a maximum of 19 inches above the finished floor. If the bench is not located next to a wall, the bench must have back support that is 42 inches minimum in length and extends from a point 2 inches maximum above the seat to a point 18 inches minimum above the bench. Benches must be strong enough to withstand a vertical or horizontal force of 250 pounds applied at any point on the seat, fastener, mounting device or supporting structure. The provisions for benches are not intended to apply to park benches or other benches used for sitting or resting.

{emailcloak=off}

Send a message